The following aspects need to be considered when choosing zinc flake coating production line: Production efficiency: Choosing a line with high production efficiency can reduce production time and cost. Coating quality: Zinc flake coating has high corrosion resistance and wear resistance, so it is v
Dacromet treatment is a new surface treatment technology, compared with the plating process, Dacromet coating is a "green coating". Its main component is zinc and aluminum coating, which is a paint coating, good corrosion resistance, thin coating, high temperature resistance, no high requirements fo
Shisheng Machinery Dacromet coating machine solution is designed based on Laspaite Hot Show Bao Coating Process . It can meet all kinds of chrome and non-chrome Dacromet coating solution (water-based and oil-based) , also can be used for other surface coating of non-zinc and aluminum parts , colorin.
The curing of Dacromet coating is divided into three stages:Stage 1: pre-baking stageThe base temperature is about 100°C, mainly to exclude and evaporate the moisture on the workpiece, also known as the drying stage.Stage 2: High temperature curing stageThe temperature is around 300°C to 350°C. The
Dacromet surface coating technology is currently the world's latest technology process for metal surface coating. With a new process of coating the metal surface with a special hybrid coating, it can replace all the pre-treatment processes of the traditional process, and the level of metal protection reaches international standards. It can be called the high efficiency completely closed green environmental protection treatment project.
According to the national standard of the People's Republic of China on "Technical Conditions of Zinc Chrome Coating" issued by the General Administration of Quality Supervision, Inspection and Quarantine in 2002, standard No. GB/T18684-2002, there are five main tests for Dacromet coating as follows